Product features:
1. AutoCAD aided design, one-time stamping sheet metal;
2. Full automatic nine stations (degreasing, pure water cleaning, heating, degreasing, phosphating, surface treatment, drying process, etc.). All components of the pre spray treatment system are pre treated to ensure a clean surface. Free of oil and rust;
3. Digital welding machine and carbon dioxide protection welding are used to ensure the welding strength and finish of the workpiece;
4. Electrostatic powder spraying system and electronic temperature control fuel curing system ensure that the workpiece is evenly heated, the adhesive force of rubber powder is environmental friendly and pollution-free.
5. The structural system shall conform to GB / t13667.3-92. The surface coating is durable, stamping resistant, corrosion-resistant, clean and beautiful, nonflammable, moisture-proof and deformation free.
6. Locks and accessories are all carefully selected. The locks are dark locks.
7. Door panel: the inner side adopts double winding tubular technology, which is firm and beautiful. The upper left corner of the cabinet door is printed with "Huadu" to show the quality of the product.
8. Door latch: the plastic anti-collision sleeve is added on the galvanized round iron with a diameter of 0.8cm to silence the door. The connection between the panel and the panel adopts a unique folding welding process, which makes the cabinet more beautiful and solid.
9. Buckle: it adopts unique stamping and inlay technology, and is flat with the cabinet surface. The process is beautiful, generous and easy to clean. The buckle has screw, steel plate protection, anti-theft and anti mite performance.
10. Drawer mounting pattern is made of self-made mute pulley, with stable and mute pulling force. Drawer buckle adopts independent debugging board, and the bottom plate has three notches. Molded buckle, gray black decoration, beautiful appearance, strong and durable.
11. Hinge: it adopts the built-in spring hinge made by Huadu, which can balance control and adjust the flatness and clearance of the door.
12. Separator: equipped with movable regulating documents. The foot is formed by stamping 1.2mm thick steel plate. The movable partition board can be adjusted freely, and each baffle board is reinforced with three fold stiffeners. The thickness of the hem is 25 mm. Use 50mm reinforcing tape, each layer bears 80kg pressure
13. Connection: the high temperature and hot-melt connection at the top and side connections ensure that the welding is firm, leave the connection joint on the top of the cabinet, make the side plate flat and perfect, and enhance the load-bearing capacity of the cabinet itself to bear the pressure. It is not easy to deform.
Maintenance method: use neutral detergent cloth to wipe, and then use clean cloth to dry.